Mercedes-Benz Firmware with EDC16 ECU

Description: Mercedes-Benz firmware package with EDC16 ECU.

ORI - Original versions

MOD - Modified versions

MOD_NoEGR - Modified versions with disabled EGR (Exhaust Gas Recirculation Valve) monitoring

MOD_NoDPF - Modified versions with disabled DPF (Diesel Particulate Filter) monitoring

MOD_NoDPF_NoEGR - Modified versions with disabled DPF (Diesel Particulate Filter) and EGR (Exhaust Gas Recirculation Valve) monitoring

ORI_NoDPF_NoEGR - Original versions with disabled DPF (Diesel Particulate Filter) and EGR (Exhaust Gas Recirculation Valve) monitoring

WHEN DISCONNECTING THE DPF, be sure to leave the Differential Pressure Sensor connected (disconnect the lines from the system).

Other components: EGR, EGT - can be completely disconnected.

When disabling the EGR/DPF, be sure to physically remove the DPF and plug the EGR valve.

The package primarily contains calibrations for flashing via the diagnostic connector.

Some firmware files are available in FULL FLASH format, but flashing is also possible via the diagnostic connector.

It is strongly recommended that you do not open EDC16 units installed in Mercedes vehicles unless absolutely necessary!

In 90% of cases, the unit's functionality cannot be restored after opening. Please exercise caution and caution.